Using two pieces of black card stock, I cut one in half lengthwise, then laying the two pieces over the remaining whole piece, I cut them into an arch. Actually, to keep the arch symmetrical I cut the two halves into half arches first, then cut the whole piece. I did the same to the background, making them about 1/4 inch smaller than the black card stock all the way around. I taped the two side pieces to the center piece with scotch tape that I'll cover with the gold masking tape which I'll cut into a hinge shape. I cut out each of the patriarchs.
I glued the background to the card stock. I swirled a thin track of tacky glue all over the back of each piece and then used a hatpin to spread the glue into a thin layer and reach all the way to the edges. I did the same for the patriarchs.
To paint the masking tape gold I just sprayed it on the roll. After it was dry I cut it into four equal pieces, being careful not to let the sticky side touch the painted side. I cut the gold masking tape into hinge shapes and covered the scotch tape. Then I outlined all the background pieces and also the halos of the patriarchs with gold glitter glue.
I'm really happy with how it came out. From a distance it could almost pass for an expensive, professionally done work of art. Up close you discover the truth!

No comments:
Post a Comment